COMPLIANCES

FCC - Class A

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures may be required to correct the interference. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

You may use unshielded twisted-pair (UTP) cable for RJ-45 connections—Category 3 or greater for 10 Mbps connections, Category 5 for 100 Mbps connections and Category 5, 5e, or 6 for 1000 Mbps connections. Use 50/125 or 62.5/125 micron multimode fiber optic cable, or 9/125 micron single-mode cable, for SFP transceiver connections.

Warnings: 1. Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic discharge when handling this equipment.

2.When connecting this switch to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground line to prevent elec- trical hazards.

EC Conformance Declaration - Class A

Contact Foundry Networks at:

Foundry Networks, Inc.

2100 Gold Street

P.O. Box 649100

San Jose, CA 95164-9100

This information technology equipment complies with the requirements of the Council Directive 89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the following standards were applied:

RFI Emission:

•Limit class A according to EN 55022:1998

•Limit class A for harmonic current emission according to EN 61000-3-2/1995

•Limitation of voltage fluctuation and flicker in low-voltage supply system according to EN 61000-3-3/1995

February 2003

© 2003 Foundry Networks, Inc.

3

Page 2 Page 4
Page 3
Image 3
Foundry Networks OSI manual Compliances, FCC Class a, EC Conformance Declaration Class a, RFI Emission
Page 2 Page 4

OSI specifications

Foundry Networks, a subsidiary of Broadcom Inc., has been a significant player in the networking industry, offering a range of products and solutions focused on high-performance and scalable networking. One of the key products from Foundry Networks is its operating system, known as Foundry Networks OSI (Operating System Interface). This proprietary operating system is designed to support the firm’s line of switches and routers, emphasizing robust performance, enhanced reliability, and comprehensive management capabilities.

A standout feature of Foundry Networks OSI is its modular architecture, which allows for easy upgrades and customization. This design enables users to add new protocols or services without disrupting existing functionalities. The OS is built on a multi-threaded architecture, ensuring efficient processing and handling of multiple tasks simultaneously. This feature is particularly crucial for environments requiring low latency and high throughput, such as data centers and enterprise networks.

Foundry Networks OSI supports a variety of advanced networking technologies, including Layer 2 and Layer 3 switching, VLAN (Virtual Local Area Network) support, and advanced routing protocols like OSPF (Open Shortest Path First) and BGP (Border Gateway Protocol). These technologies ensure that the network can efficiently handle traffic management while maintaining high availability and redundancy.

Another notable characteristic of the OSI is its support for IPv6, which is essential as more organizations transition to the newer protocol to accommodate the growing number of Internet-connected devices. Through enhanced quality of service (QoS) features, Foundry Networks OSI allows administrators to prioritize traffic, ensuring that mission-critical applications receive the bandwidth they require.

Security is a critical concern in modern networking, and Foundry Networks OSI addresses this need with robust security features. The system includes access control lists (ACLs), port security options, and support for 802.1X authentication to provide secure access to the network. These security measures help to protect the network from unauthorized access and potential threats.

Moreover, the OSI offers an intuitive management interface, simplifying the task of monitoring and configuring network devices. GUI-based and CLI (Command-Line Interface) management options cater to different preferences and skill sets, making it easier for network administrators to maintain and optimize their networks.

In summary, Foundry Networks OSI stands out for its modular design, support for advanced networking technologies, robust security features, and user-friendly management interface. These characteristics make it a suitable choice for organizations that prioritize high performance, reliability, and scalability in their networking solutions. As enterprises continue to evolve, Foundry Networks OSI remains a relevant and powerful tool in the networking landscape.
Top Page Image Contents