Franke Consumer Products FCR 908 TC Maintenance, Metal grease filters, Alarm reset, Cleaning

MAINTENANCE

REMOTE CONTROL (OPTIONAL)

The appliance can be controlled using a remote control powered by a 1.5 V carbon-zinc alkaline batteries of the standard LR03- AAA type (not included).

• Do not place the remote control near to heat sources.

• Used batteries must be disposed of in the proper manner.

Metal grease filters

Metal filters can be washed also in a dish machine. They need to be washed every time a drop-symbol appears in the display or at least every two months. In case of very frequent use these have to be washed even more often.

Alarm reset

• Press the G-key for at least 2 seconds.

Cleaning

•Remove the filters one at a time holding them up with one hand and pulling the handle downwards with the other hand at the same time.

•Wash the filters. Pay attention not to bend them. Make sure that filters are completely dry before putting them into their seat. (a possible modification of the filter surface doesn’t influ- ence its efficiency).

•Place the filters again into their seats and make sure that the handle of the filter remains outside.

EN	9
	9