Franklin ATH-2011 manual Cartridge Care, Resetting BOOKMAN, Troubleshooting Tips

Cartridge Care Resetting BOOKMAN

•Do not touch the metal con- tacts on the book cartridges.

Caution: Touching these electrical contacts with statically charged ob- jects, including your fingers, could erase information entered in a car- tridge or built-in book.

•Do not put excessive pressure on the book cartridges.

•Do not expose the book car- tridges to heat, cold, or liquids.

If the BOOKMAN keyboard fails to re- spond, or if its screen performs errati- cally, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below.

Warning: Pressing the reset button with more then very light pressure may permanently disable your BOOKMAN. In addition, resetting BOOKMAN erases settings and information entered into its built-in book and in an installed cartridge.

1.Hold CLEAR and press ON/OFF . If nothing happens, try Step 2.

2.Use a paper clip to gently press reset button on BOOKMAN.

The reset button is recessed in a pin- sized hole on the back of BOOK- MAN. Look for it on the battery cover or near the cartridge slot.

➤Troubleshooting Tips

•Check that the book cartridge, if any, is installed correctly.

•Check that the cartridge’s metal contacts are dirt-and dust-free.

11