Installing the Battery

Your BFQ-470 is powered by one CR2032, 3-volt battery. Before using the device, gently pull the battery insulation tab to remove it. Use a paper clip to gently press the RESET button on the back of the device. See “Resetting Your BFQ-470” for details.

Warning! Pressing the reset button with more than light pressure may permanently disable your BFQ-

470.In addition, resetting the BFQ-470 erases settings and user-entered information. Replace the battery when the display dims.

Warning!! If the battery wears out completely, or if you take more than several seconds while changing the battery, any user-entered information will be erased. You should always keep written copies of your important information.

Follow these instructions to install or replace the battery.

1.Turn the unit off and turn it over.

2.Lift the battery cover on the back of the unit by pushing up on the catch. 3.Use a paper clip, if necessary, to remove the old battery.

4.Install the battery positive side facing up in place of the old battery.

Note: Do not remove the foam protector from the other battery slot or attempt to install a battery there. Your device only functions with the battery where it was pre-installed.

5.Replace the battery cover.

Page 6
Image 6
Franklin BFQ-470 manual Installing the Battery