Franklin DBE-1440 Installing Batteries Changing the Language, Message Language, Entry Language

Installing Batteries Changing the Language

Your product is powered by two CR- 2032 lithium, 3-volt batteries. Follow these easy instructions to install or replace them.

1.Turn your product over.

2.Lift the battery cover on the back of your product by pushing up on the catch.

3.Install the batteries with the positive side facing up.

4.Replace the battery cover.

Warning: If the batteries wear-out completely, or if you take more than approximately a minute while changing the batteries, any information that was entered in the built-in book or book card except My Word List will be erased. You should always keep written copies of your important information.

➤Help is Always at Hand

You can view a help message at any screen by pressing help . Press

space or to read. To exit help, press

clear .

Message Language

When you turn on this product for the first time, you must choose the message language. Press a for English or press b for Spanish.

The message language is the language of prompts, help, and other messages. You can change the message language after your initial decision. See “Changing the Settings” to learn how.

Entry Language

The entry language is the language in which you enter words at the Word Entry screen. This determines which dictionary you will use, Spanish or English.

1.Press menu .

2.Use the direction keys to highlight , and then press enter to access the Spanish-to-English dictionary.

Select at the icon menu to go to the English-to-Spanish dictionary.

Or you can press lang at the Word Entry screen to switch between Spanish and English.

5