Replacing the Battery

This organizer uses two CR2032, 3-volt lithium batteries. Before you follow these steps you should have a small Phillips screwdriver (one that fits into screws with an "" notch) and the new batteries at hand.

Warning! When no batteries are installed, this organizer will save your information for only about 30 seconds. So quickly install the new batteries when you remove the old ones.

1.Turn off the organizer and turn it over.

2.With the Phillips screwdriver, remove the screw to the battery cover and then remove the lid.

3.Remove the old batteries and quickly replace them with the new batteries, with the positive (+) sides facing up.

4.Replace the battery cover.

Warning! If RESET? appears when you next turn on the organizer, do not press ENTER unless you want to reset the organizer and erase all your information.

Keep Written Copies of Important Data

This organizer stores your information as long as the batteries supply power.

Warning! If the batteries lose power or are removed, all your information will be lost. Information can also be lost or corrupted if you make a mistake while operating this organizer. Therefore, always keep written copies of your important information in case it is corrupted or lost.

47

Page 48
Image 48
Franklin RF-192 Replacing the Battery, Keep Written Copies of Important Data, Turn off the organizer and turn it over