Four Station Charger | PSC PowerScanTM RF specification

Four Station Charger

If you have a Four Station Charger, batteries are inserted for charging as shown in Figure 5. A 90% rapid charge can be achieved in only two hours when using this optional accessory, half the time than when a Base Station is used for charging. The LEDs at each battery station operate the same as the CHARGE LED on the Base Station, with rapid flashing indicating that rapid charging is taking place and on steady during trickle charging or when the rapid charge cycle is fin- ished.

		If you insert a battery into the Four Station Charger
		and no LEDs illuminate, the battery may be too
		cold. Batteries must be at 0°C or higher to charge.
		Do not attempt to charge cold batteries, since plac-
	NOTE	ing them in the charger will curtail the charging of
	NOTE	other batteries already present in the unit.
		other batteries already present in the unit.

Figure 5. Using the Four Station Charger Accessory

1

2

1. Device Power LED

2. Station Charge LEDs

User’s Guide

9

Image 12

PSC PowerScanTM RF manual Four Station Charger, Other batteries already present in the unit

Contents

User’s Guide PSC Scanning, Inc Disclaimer Table of Contents Unpack and Inspect Your Scanner ReferencesQuick Start Instructions Installing the Battery Charging and Maintenance on Connecting the Base Station to the Host Terminal Nected to at the time of power-upVerifying Scanner Operation Connecting Power to the Base Station Ment or interruption of system functions Newer configuration to the Base Station prior to Linking the Scanner to a Base StationLinking May not be desirable to download a potentially Verifying Scanner-to-Base Station Communications Using the PowerScan RF System Battery Charging and Maintenance Tips for Extending Battery Life Disposing of BatteriesNot illuminate No LEDs illuminate, the battery may be too Four Station ChargerOther batteries already present in the unit How to Scan Scanning Tips Specifications are subject to change without notice Depth of FieldDefinition of a mil Information about the Half Angle feature Depth of Field HD More information about the Half Angle feature Are based on LR models set with the a 14 scanPaper Labels LR decoded model, Code Reflective Labels LR decoded model, Code Paper Labels XLR decoded model, Code Reflective Labels XLR decoded model, Code LED and Beeper Indications Grammable Scanner Green LED Functions Scanner Yellow LED Functions Scanner Beeper Functions Speaker Duration Comment Base Station LED Functions When a scanner is Active Symbologies Enhanced Scanning for Hard-to-Read Bar Codes Your nearest sales or service representative Scanner Labeling and Nomenclature Laser Cautions Line and is not considered a malfunctionIs a factory only repair item Beam or attempt to repair the unit. Discontinue Radio Frequency Interference Maintenance Cleaning the Scan Window Troubleshooting Battery is charged. See Battery Charging and Maintenance on Sample Bar Codes UPC-A User’s Guide Declaration of Conformity Asia Pacific Italy Australia JapanFrance Latin America Germany United Kingdom