PSC PowerScanTM RF manual Laser Cautions, Line and is not considered a malfunction

Laser Cautions

The PowerScan RF bar code scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J for Class II laser products (SR and LR) and Class IIIa (XLR). Class II and IIIa prod- ucts are not considered to be hazardous. The scanner contains a Visi- ble Laser Diode (VLD) at a wavelength of 650-670 nanometers and is designed so that there can be no human access to harmful levels of laser light during normal operation, user maintenance, or during pre- scribed service operations.

	In the unlikely event that a bright laser spot is expe-
	rienced rather than a scan line, do not stare into the
	beam or attempt to repair the unit. Discontinue
	operation and return the unit to your dealer. Note
CAUTION	that when using Marker Beam Mode, a single aim-
	ing dot is projected momentarily preceding a scan
	line and is not considered a malfunction.
	Do not open or otherwise service any components
	in the optics cavity. Opening or servicing any part
	of the optics cavity by unauthorized personnel may
CAUTION	violate laser safety regulations. The optics system
	is a factory only repair item.

The PowerScan™ RF scanner is required to be used

in conjunction with the PSC Base Station, Model:

PowerScan RF Base Station.

NOTE

User’s Guide 21