2.Consult your Host Terminal manual to determine the required communication parameters for the Host Terminal (e.g., baud rate, parity, etc.) and, if necessary, modify the pro- grammed parameters to be compatible with those require- ments. Scanner and Base Station programming is performed using one of the following:
-Configurator Express™ Programming Software
-PowerScan™ Bar Code Scanner Programming Guide
See References for more information about how to obtain software and manuals for this product.
NOTE
| The Host Terminal manual should also be consulted |
| as to whether power must be turned off before con- |
| necting peripheral devices. Ensure that the correct |
CAUTION | procedure is followed to avoid damage to equip- |
ment or interruption of system functions. |
3.Connect the I/F cable to the proper port on the Host Terminal (check your Host Terminal manual to determine hardware requirements).
4.Connect the AC Adapter's power cord at the Base Station and plug the AC/DC adapter in at the wall outlet (see Figure 3). The Base Station’s POWER LED should be illuminated when the unit is properly connected to power.
Figure 3. Connecting Power to the Base Station
4 | PowerScan™ RF Scanner |
