Installation screen appears | Franklin RL-8221 specification

• Available USB port

To transfer records from the unit to a PC, follow these instructions.

1.Insert the USB Databank Installation CD into the CD-ROM drive on your PC.

2.The installation screen appears.

If the installation screen does not appear, dou- ble-click My Computer and then click the drive where you inserted the Installation CD.

3.Follow the instructions on the screen to install the program.

4.Click Finish to complete the installation.

The USB Databank software is launched auto- matically.

If the software does not open, click on Start Programs USB Databank.

5.Remove the USB Databank Installation CD from the CD-ROM drive on your PC.

6.Remove the cap from the right side of the unit to expose the USB connector.

7.Plug the USB connector into an available USB port on your PC.

If prompted for the directory where driver files are located, browse to the Driver directory. The default installation directory is

C:\Program Files\MicroEpower\USB Databank\Driver\.