If prompted to install the Windows setup disk, insert the Windows setup CD into the CD- ROM drive.
8.Press the
Once your PC recognizes the USB Databank, the records from the unit will be transferred to the PC.
Graphics appear on the unit to indicate what is happening.
Data is being transferred successfully.
No data is being transferred between the unit and the PC.
Data was transferred successfully.
Resetting the Device
If the unit fails to respond or if the screen performs erratically, perform a system reset. Use the point- ed end of a paper clip to gently press the RESET button. The RESET button is recessed in a pin- sized hole on the back of the unit.
Warning! Pressing the RESET button with more than light pressure may permanently disable the unit.
13
