Operation
Franklin Thermoelectric Ready-to-Drink Wine Cellar
This unit can be used to store red wine at temperatures in the
1.Setup and Start
This wine cellar can be plugged into any standard 120V 60Hz socket that has been properly installed and grounded.
IMPORTANT! For your personal safety, this appliance must be properly grounded. It is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly installed and grounded.
When the unit is plugged in you will not hear any operating noises. There is a fan inside the unit, but each time you open the door, the fan automatically goes off. Other than the internal fan, there are no moving parts in the unit.
2.Adjusting the Temperature
On the back of the unit is a cylindrical thermostat knob that can be turned to raise or lower the inside temperature. Just adjust this knob until the temperature is right for the wine you are storing. Use a thermometer to check the temperature.
3.Recovery Time
One characteristic of thermoelectric units is the length of time the unit requires to recover from having the door opened and shut. It is necessary to wait several hours for the temperature to return to its former level once the door has been opened. This is normal for this type of unit.
4.Use of Extension Cords
Avoid the use of an extension cord because of the potential safety hazards under certain conditions. If it is necessary to use an extension cord, be sure to use a
5.Temperature Range
All wines are best stored on a
3