Franklin Industries, L.L.C fim35 user manual Check if the water supply pressure is

Problem	Possible Cause	Probable Correction
		Check if the water supply pressure is
Cubes are partially		below 15 psig.
formed or are	Not enough water in the	Check water supply; filter may be
white at the	water trough.	restricted.
bottom.		Check for a water leak at the water
		trough.
Noise during	The feet are not leveled and	Level and lock the feet. See “Leveling
	locked.	the Ice Maker”.
operation
	Certain sounds are normal.	See “Normal Sounds”.
	The electricity is off.	Reconnect the power supply line.
	The room temperature is	Cut off the electricity; let the ice maker
		stop working until the temperature
The ice maker	out of the stated range.
		returns within the stated range.
stops suddenly
	The ice storage bin is full of	Remove some ice cubes; make sure the
while making ice.
	ice.	ice-full probe is free of ice.
	The drainage tray on top of	Drain off water by unscrewing lower
	the compressor is full.	drainage nut.
The body of the	The grounding line isn’t in	Use a socket meeting the required
ice maker is
	the socket.	electrical standard.
electrified.
Scaling occurs	The hardness of the water is	Use a water-softening device installed
frequently inside
	too high.	in front of the water inlet.
the machine.
The ice maker	The drainage tray on top of	Drain off water by unscrewing lower
makes an alarm
	the compressor is full.	drainage nut.
sound regularly.

25