Franklin Industries, L.L.C FIM400 Normal Sounds, Preparing the Ice Maker for Long Storage

Models: FIM400

1 24
Download 24 pages 8.41 Kb
Page 15
Image 15
Normal Sounds

Evaporator

 

 

Water

 

 

inlet

 

 

 

 

Water

 

 

pump

Water tank

Hot gas valve

 

 

 

Compressor

Condenser

Fan

motor

 

 

Normal Sounds

Your new ice maker may make sounds that are unfamiliar to you. Most of the new sounds are normal. Hard surfaces like the floor and walls can amplify the sounds. The following describes the kinds of sounds that might be new to you and what may be causing them.

?Rattling noises may come from the flow of the refrigerant or the water line. Items stored on the top of the ice maker can also make noises.

?The high-efficiency compressor may make a pulsating or high-pitched sound.

?Running water may make a splashing sound.

?You may hear air being forced over the condenser by the condenser fan.

?During the harvest cycle, you may hear the sound of ice cubes falling into the ice storage bin.

Preparing the Ice Maker for Long Storage

If the ice maker will not be used for a long time, or it is to be moved to another place, it will be necessary to drain water from the system.

1.Shut off the water supply at the main water source.

2.Disconnect the water supply pipe from the water inlet.

3.Shut off the power supply at the main electrical power source.

4.Screw off the water tank’s drain screw nut and drain out water completely, then tighten the nut after finishing. Dry the water tank.

5.Remove all ice cubes from the ice storage bin and dry it.

6.Leave the door open to allow for ventilation and to prevent mold and mildew.

7.Leave the water supply pipe and power cord disconnected until ready to reuse.

IMPORTANT:

?Do not touch the power plug when your hands are wet.

?Never unplug the unit by pulling on the plug.

14

Page 15
Image 15
Franklin Industries, L.L.C FIM400 user manual Normal Sounds, Preparing the Ice Maker for Long Storage