Ice Maker Installation
Unpacking
This unit is an ice maker only. It requires a separate ice storage bin.
Remove packaging materials
IMPORTANT: Do not remove any permanent instruction labels or the data labels on your ice maker.
Remove tape and glue from your ice maker before using:
?To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry with a soft cloth.
?Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your ice maker.
Location Requirements
?This ice maker should be installed by qualified personnel.
Installation clearance
TOP VIEW
7