Franklin Industries, L.L.C FIM400 user manual Condenser Air Filter Cleaning

Maker Cleaner Solution into the water tank.

4.Turn on the power switch. Within 3 minutes press the Clean button. The machine will go into the cleaning mode automatically.

5.The ice-making system cleaning cycle will continue for 30 minutes unless you press the power switch (you can press the power switch to stop the cleaning cycle any time during the 30 minutes). After cleaning, the harvest indicator and ice-making indicator LEDs will be on. The cleaning process stops.

(NOTE: The dirty water must be drained out completely.)

6.Perform steps 2 and 3 in the Interior Cleaning section.

7.Repeat steps 3 to 5 above three times to rinse the ice-making system thoroughly. This will complete ice-making system cleaning.

(NOTE: Do not add Ice Maker Cleaner Solution to the water tank during the rinses.)

8.If you want to make ice cubes after cleaning, turn off the power switch, drain off the waste water, then turn on the power switch. The next ice-making cycle will begin.

9.Discard the first batch of ice.

Condenser Air Filter Cleaning

1.Remove the screws and pins holding the condenser air filter. See drawing below.

Condenser air filter

17