CARE & CLEANING
Cooktop cleaning (cont’d)
Plastic or foods with a high sugar content:
These types of soils need be removed immediately if spilled or melted onto the ceramic cooktop surface. Permanent damage (such as pitting of the cooktop surface) may occur if not removed immediately.
After turning the surface elements OFF, use a razor blade scraper or a metal spatula with a mitt and scrape the soil from the hot surface (as illustrated). Allow the cooktop to cool, and use the same method for heavy or burned on soils.
WARNING
DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health and can chemically damage the ceramic glass surface.
Do not use the following on the cooktop:
•Do not use abrasive cleaners and scouring pads, such as metal and some nylon pads. They may scratch the cooktop, making it more difficult to clean.
•Do not use harsh cleaners, such as chlorine bleach, ammonia or oven cleaners, as they may etch or discolor the cooktop.
•Do not use dirty sponges, cloths or paper towels, as they can leave soil or lint on the cooktop which can burn and cause discoloration.
BLEACH
ABRASIVE | ||
C | LEANER | S |
AMMONIA
IMPORTANT
Damage to the ceramic glass cooktop may occur if you use an abrasive type cleaning pad. Only use cleaning products that have been specifically designed for ceramic glass cooktops.
Caution for aluminum use on the cooktop
•Aluminum Foil - Use of aluminum foil on a hot cooktop will damage the ceramic cooktop. Do not use thin aluminum cooking utensils or allow aluminum foil to touch the ceramic cooktop under ANY circumstances.
•Aluminum utensils - The melting point of aluminum is much lower than that of other metals. Care must be taken when aluminum pots or pans are used on the cooktop. If aluminum pans are allowed to boil dry when using the cooktop, not only will the utensil be damaged or destroyed, but it may fuse to, break or mark the ceramic glass surface, permanently damaging the cooktop surface.
Replacing oven light
CAUTION
Be sure the range is unplugged and all parts are COOL before replacing oven light. Wear a
The interior oven light bulb is located at the upper left rear of the oven cavity.
To replace the oven light bulb
1.Turn electrical power off at the main source or unplug the range.
2.Replace bulb with a new 40 watt appliance bulb.
3.Turn power back on again at the main source (or plug the appliance back in).
4.The clock will then need to be reset. To reset, see “Setting the clock” in this Use & Care Guide.
18
