Freecom Technologies Dual Drive Network Center

FREECOM DUAL DRIVE NETWORK CENTER

Adding and removing mapped networ k shares

You can assign a drive letter to shared folders on your Dual Drive Network Center. This

allows you to access files in Windows more quickly.

Start recovery procedure

This procedure can reset and repair a Dual Drive Network Center to factory default settings

if you cannot access your Dual Drive Network Center anymore.

To restore your settings, please proceed as follows:

a) Enable the Recovery mode by clicking 'Start the recovery procedure' in the Freecom

Network Storage Assistant.

b) Turn the Dual Drive Network Center off.

c) Use a p ointed object to carefull y press the 'Reset' button. It is located next to the AC

power slot on the back of the Dual Drive Network Center.

d) Keep the 'Reset' button pressed down and tur n device on again.

e) Wait until white LED goes off (ca. 1 second), the release the 'R eset' button.