4.4.1 Sample Procedure for Changing and Saving Values
This section contains an example of how to change and save values in Menu
Mode. Use the steps in Table 4–6 to perform the following tasks:
• Enter Menu Mode
• Change page offset values of X and Y in the LAYOUTmenu
from to
• Save the new values in NVRAM
• Exit Menu Mode
Before You Begin
This example assumes that the printer is using the factory default values
in ROM. Youwill use Test Print A to verify the changes you make. Print a
copy of Test Print Abefore beginning this example (Section 2.12). Be sure
that all printing has stopped and the display reads 00 READY before you
make any changes.

Table 4–6: Changing and Saving Values

Operation Display Reads
1. Press OnLine to place the
printer off line.
— The On Line indicator
shuts off.
00 READY
2. Press Menu to place the
printer in Menu Mode. FONT/FEED LAYOUT
3. Press once to scroll
the display to the
LAYOUTmenu.
LAYOUTCOPY/OVER
4. Press Enter to enter
the LAYOUTmenu. offsetX offsetY
5. Press Enter to select
the offsetX feature. offsetX =+0.0
4–12 DEClaser 2100 Printer Operator’s Guide