AGFA 2100 manual Cont. Changing and Saving Values, OffsetY autoNL o

Table 4–6 (Cont.): Changing and Saving Values

Operation					Display Reads
6.	Press	/ until the			offsetX -10.0
	value equals -10.0.
	NOTE: The value decreases
	in steps of 0.5.
					offsetX =-10.0(momentarily)
7.	Press	r Enter		to enter
					#
	the new value.
						offsetX offsetY
8.	Press	. once to scroll			offsetY autoNL o
	the display to the offsetY feature.
					offsetY =+0.0
9.	Press	r Enter		to select
	the offsetY feature.
					offsetX -10.0
10.	Press		/ until the
	value equals -10.0.
	NOTE: The value decreases
	in steps of 0.5.
11.	Press			to enter	offsetY =-10.0(momentarily)
			rEnter		#
	the new value.
						offsetY autoNL o
12.	Press 4 to return				LAYOUT COPY/OVER
	to the menu selections.
					SAVE->NVRAM LOAD
13.	Press / three
	times to reach the
	NVRAM SAVE menu.
14.	Press			to save	OK (momentarily)
			rEnter		#
	the offset values in					SAVE–>NVRAM LOAD
	NVRAM.

Printer Configuration 4–13