3. Press On Line to place the printer off line. |
—The On Line indicator shuts off.
4.Press Manual Feed (once or twice) until the display reads FEEDER = Manual.
—After about three seconds the display will read 00 READY.
—The manual feed mode selection is now stored in operating memory.
5. Press On Line to place the printer back on line. |
—The On Line indicator lights.
6.Send data from the host computer to the printer.
—The Data indicator lights and the display reads PF FEED xxx (where xxx = paper size).
7.Adjust the manual feed guides to accept the width of the paper.
Fig
