AGFA 2100 manual Initial Menu Features and Values

4.5.5 INITIAL Menu

The INITIAL menu (Table 4–12) combines the macro, paint, and paper size features. You can save settings from this menu only in NVRAM.

Table 4–12: INITIAL Menu Features and Values

Feature	Values	Description
macro	0001–099	Assigns the user preference set and device identification
		answer (see Section 4.5.5.1).
paint	Partial1	None of the memory is reserved for bitmap pages.
		Memory is allocated dynamically.
	Full	Directs the printer to allocate memory space for one
		full bitmap page (A4 or letter-size). The Full setting
		eliminates complex errors but may slow the printer down
		if all pages require a full bitmap.
		NOTE: This value can be activated only if at least 1 MB
		of optional RAM is installed in the printer.
	Dual	Directs the printer to allocate memory space for two full
		bitmap pages (A4 or letter-size). The Dual setting allows
		you to print at a more efficient speed for documents that
		require full page bitmaps for all pages. It also allows you
		to print duplex pages, for which each side requires a full
		page bitmap. The Dual setting requires more memory
		space that must be shared with fonts.
		NOTE: This value can be activated only if at least 2 MB
		of optional RAM is installed in the printer.
paper	letter1	Specifies letter-size (8 ½" x 11.0") paper for manual feed
		operation.
	A4	Specifies A4-size (297 mm x 210 mm) paper for manual
		feed operation.

1Factory default setting.

Printer Configuration 4–23