AGFA 2100 manual LN03 Compatibility D-3

•The DEClaser 2100 does not contain the Modern Gothic font resident in the LN03 PLUS.

•If a font used on the page is deleted to free up memory for another requirement, the DEClaser 2100 may cause a page break. It does not try to transfer the display list to bitmap memory like the LN03 PLUS would. If you encounter page breaks, set the paint feature value to Full (see Table 4–12).

NOTE: The Full value can be activated only if at least 1 MB of optional RAM is installed in the printer.

•When a font report is issued, the DEC Supplemental Character Set is now reported as 245 (94-character set %5), rather than 01O (94- character set <) which is now the User Preference Character Set. The DEClaser 2100 has three Hebrew character sets and the Legal character set resident in the printer. This also modifies the font status report because more fonts are included.

•The DEClaser enforces the Common Font File Format (CFFF) syntax and semantics more strictly than the LN03. Therefore, some fonts containing errors, which load correctly on the LN03, may not load properly on the DEClaser 2100 and will generate an error report.

•The DEClaser 2100 can save more user default settings in NVRAM than the LN03 can save using DIP switches. Therefore, when a reset command is received, more values can be saved in the DEClaser 2100. To ensure that values are not cleared during a reset, save them to NVRAM whenever possible.

LN03 Compatibility D–3