AGFA 2100 manual Cleaning the Transfer Corona Wires and Discharging Pins

7.1.3Cleaning the Transfer Corona Wires and Discharging Pins

The transfer corona wires and discharging pins are part of the paper transfer area inside the printer. Normally, you clean these corona wires and discharging pins each time you replace the EP-S cartridge, but you may find it necessary to clean them between cartridge replacements if you experience problems with print quality.

NOTE: You will need a dry cotton swab, such as the one supplied with new EP-S cartridges, to clean the corona wires.

1.Be sure the printer is not printing and the display reads 00 READY.

2.Press the power switch on the back of the printer to the O (OFF) position.

Fig 7-17, MLO-004829

Maintenance 7–13