5.3 Transparency Specifications
Table5–3 and Table 5–4 contain information on the sizes and specifications
of transparencies that can be used with the DEClaser 2100 printer.

Table 5–3: Transparency Sizes

TransparencySize Dimensions
A4 210 mm x 297 mm
Letter 8 ½" x 11"

Table 5–4: Transparency Specifications

Category Specification
Transparencyweight 60 g/ 2to 135 g/ 2basis weight
(16 lb. to 36 lb.)
Thickness 0.075 mm to 0.115mm
Moisture content 5% to 8%
Smoothness 100–300 Sheffield
Heat tolerance 200°C (392°F) for 0.1 second
Electrical resistance 1.0 x 11 ohm-cm–2.0 x 12 ohm-cm (cubic content)
2.0 x 10 ohm-cm–2.0 x 11 ohm-cm (surface)

5.3.1 Special Considerations When Printing Transparencies

Observe the following requirements when printing on transparencies:
• Transparencies are usually fed manually. If you are feeding
transparencies from a cassette, be sure they are high-quality
transparencies and meet the specifications listed in Table 5–4.
• Remove transparencies from the rear output tray as each one is printed
to prevent them from sticking to each other.
5–8 DEClaser 2100 Printer Operator’sGuide