AGFA 2100 manual Ready DEC

You should observe the following when you power on the printer:

—All control panel indicators light for a moment.

—The Ready indicator flashes and the display reads

02 WARMING UP (assuming that the printer has cooled below operating temperature before it is powered on).

—The Online and Ready indicators remain on and the display reads

00 READY DEC.

NOTE: The display reads 00 READY DEC only if you are using Digital's ANSI-Compliant Printing Protocol level 3 (PPL3), which is the factory default setting. If you are using an optional protocol such as PostScript or CaPSL, the display shows the protocol being used. For instance, if you are using PostScript protocol the display reads 00 READY PS. Since several protocols can be used with the DEClaser 2100 printer, the remainder of this manual shows the ready message as 00 READY.

If the printer does not power on correctly, refer to Chapter 6 for troubleshooting information.

2–2DEClaser 2100 Printer Operator's Guide