ConnectingiAUDIOandInstallingJetShell

Installing JetShell

When you insert the iAUDIO Installation CD in the CD-ROM drive, the installation program starts automatically. It may not start automatically sometimes depending on the status of the Windows. In this case, run CD-ROM: \Setup.exe or CD-ROM:\JetShell\Setup.exe.

When the installation finishes, Start → Programs → COWON → iAUDIO 4 program group is registered.

Connecting iAUDIO

Windows ME/2000/XP

1.Insert a new battery in iAUDIO correctly.

2.The H:\ drive shown in the illustration is an example, and it may be different from the actual drive name of your PC. It was given for your reference only.

3.With the USB cable, connect the USB ports of iAUDIO and your PC. (iAUDIO should not use a USB hub. It is assumed that you connect to the USB port on the main board.)

4.In the normal Windows environment, as soon as the cable or simple USB jack is connected, the message "Searching for new device" appears and the USB driver for iAUDIO 4 is installed automatically. The drive installation window may not appear on the screen depending on the status of Windows.

45

iAUDIO 4

Page 45
Image 45
Cowon Systems 4 manual Installing JetShell, Connecting iAUDIO, Windows ME/2000/XP