Table 4–16 (Cont.): INTERFACE Menu Features and Values
Feature Values Description
8OS 8 data bits
Odd parity check
1 stop bit
7ESS 7 data bits
Even parity check
2 stop bits
7OSS 7data bits
Odd parity check
2 stop bits
7ES 7 data bits
Even parity check
1 stop bit
7OS 7 data bits
Odd parity check
1 stop bit
8SS 8 data bits
No parity check
2 stop bits
dtr2Fix-H1Sets the DTR line to a fixed high signal.
Ready-H Setsthe DTR line to a high signal when
the printer is ready to receive data.
xon/xoff2ON1Enables buffer overflow control.
OFF Disablesbuffer overflow control.
etx/ack2OFF1Disables buffer overflow control.
ON Enables buffer overflow control.
NOTE: Etx/ack is not supported on Digital
systems.
1Factory default setting.
2Availableonly when RS232C is selected.

4.5.6.1 Interface Selection (i/f)

The interface selection (i/f) feature selects the type of interface used to

communicate with the host computer. It must match the interface used by

the host computer, either serial or parallel.

When you select the parallel interface, you do not select any other settings

in the INTERFACE menu. The other features in this menu apply only

4–28 DEClaser 2100 Printer Operator’sGuide