Use the following procedure to acknowledge the error condition and continue printing:

1. Press

Error Skip

.

The Alarm indicator shuts off.

The error condition clears.

The display reads 00 READY.

2. Press

On Line

.

The On Line indicator lights.

Printing continues.

Some communication or formatting errors may repeat when the printer is receiving additional communications data. When this happens you may need to repeat the error skip procedure several times.

6.2 Printer Status Messages

Printer status messages are displayed to show the printer's current operating condition (see Table 6–1). This status information lets you know if the printer is performing a task or is ready to receive another job. Status messages are displayed whether the printer is on line or off line.

Table 6–1: Printer Status Messages

Message

Meaning

00

READY

The printer is ready to operate. The ready condition can exist

 

 

whether the printer is on line or off line.

01

TEST PRINT B

Test Print B is being printed (Section 2.13).

02

WARMING UP

The printer has not reached operating temperature. Printing

 

 

cannot be performed while the printer is warming up.

03

RESET

The printer is being reset (Section 2.16).

04

TEST STOP

Test printing has stopped.

05

TEST PRINT A

Test Print A is being printed (Section 2.12).

06

FONT LIST A

Font List A is being printed (Section 2.14).

15

ENGINE TEST

The mechanical engine test is being executed (Section 2.11).

 

 

 

6–2DEClaser 2100 Printer Operator's Guide

Page 125
Image 125
AGFA 2100 manual Printer Status Messages, Message Meaning