GB
2
FREECOM Portable II Series
ONLY PORTABLE II CD-RW / COMBO CD-RW / DVD
CHAPTER 2: Installing the Writing Software
AfterinstallingtheCable
To record a blank CD, you must first install the writing software (for the mastering or the packet writing procedure). We recommend using the software which has been provided with your drive.
The installation guide for the software is supplied on the same CD as the software. After installing the recording software, the drive is fully operational.
Note: If you wish to use other software, please find out from the supplier whether his products support the FREECOM Portable
CHAPTER 3: Special Instructions before Writing a CD
•YoushouldrealizethatwritingCDsisprincipallyacompactdatatransmission procedurewhichcanbedisruptedbyeventhesmallestmechanicaldisturbance.
•Never
•Recordable CDs (blanks) are more sensitive than commercially available CDs. Use only a
•Do not stick any conventional labels on the
•The drive recognizes the medium as soon as it is placed into the drive.
Note: For optimal results, use high quality
12