Freecom Technologies II manual System Requirements

System Requirements

System Requirements

The following hard- and software requirements must be fulfilled to ensure trouble-free operation.

Hardware Requirements

To use the FREECOM drive, you will need:

•FREECOM Cable II Parallel, PCMCIA, CardBus, USB or IEEE 1394 (FireWire) - depending on the port (Cables not included unless otherwise indicated on the packaging)

Depending on the connection type, a

•parallel printer port (standard, bidirectional, EPP)

•PCMCIA port (type II)

•CardBus (type II)

•USB port

•IEEE 1394 port (FireWire/i.LINK)

A computer system with the following equipments

-for the Portale II CD:

•PC from 486DX and higher

•at least 8 MB RAM

•at least one disk drive and a hard disk

-for the Portale II DVD:

•PC from Pentium II and higher

•at least 32 MB RAM

•at least one disk drive and a hard disk alternatevily

•FREECOM Cabel II PCMCIA / or FREECOM Cable II IEEE 1394 (FREECOM Cable II USB and Parallel do not support movie playback)

•To play back DVD Movies’s, a DVD-Movie decoder is needed. This can be a hardware decoder or a software decoder. Hardware decoders are available as PCI or PCMCIA card and are available in the computer shop.

•A Software DVD-Movie playback application is included with the Traveller II DVDdrives.WerecommendtousethissoftwareonlyonaPentiumII400Mhz with 64 MB RAM or higher.

•This drive is RPC-2 (Regional Protection Coding II) enabled. Your Region will need to be set before DVD Movies can be played.

Note: Please note that the regional code may not be changed more than five times.

GB

5