Hot Plug Function | Freedom9 KVM-16H, KVM-08H specification

Chapter 3: Console Operation

Hot Plug Function

KVM switch supports “ Hot Plug ” function. When mouse/keyboard connection has been changed from one port to the other, it is not necessary to reboot the managed computer for the change to take effect.

NOTE:

Some O.S. (Operation Systems) like SCO Unix are unable to support “ Hot Plug ” function. If you apply “Hot Plug” to this kind of O.S., it will cause unpredictable behavior or shut down the computer. Before using “ Hot Plug ” , please make sure your O.S. and mouse software driver supports the “Hot Plug” function.

14

Image 17

Freedom9 KVM-16H, KVM-08H user manual Hot Plug Function

Contents

Port / 16 port Stackable TWO-CONSOLE Freedom9 Inc. 1 Year Limited Warranty Table of Contents Introduction Model No. Two-console 16 port PS/2 KVM Switch Features All Female Types Console Port Connector Local Console Model No Two-Console 16 port PS/2 KVM Switch AT to PS/2 keyboard adapter Optional Cable Diagrams Computer Port Special CableDaisy Chain Cable PS/2 Cable VGA Cable Local Console Hardware InstallationStep Extending your computer console up to 500 feet away Remote Console Optional Hardware Installation Master Bank Slave Bank Maximum 8 Levels Console Operation Below are the hot key commands list Selecting Computer Using Hot Key Example Selecting Computer through Hot Key Example Hot Plug Function OSD Operation Details Use PgUp or PgDn key for selecting previous or next Bank No Use up arrow key or down arrow key to select KVM portPress Insert key for editing computer name Press Tab key to select Bank, OSD, Scan…etc Console Operation Troubleshooting CE Certificate CertificationsPage Freedom9 Inc