English

Adjusting Depth of Cut

WARNING! Disconnect tool from power source.

There are two methods for adjusting the depth of cut on the FT3000 Router. The Depth Adjustment Knob (A) is best for non plunging operations. The Depth Stop Turret (I) and Turret Stop Rod (D) is best for operations where there are repeatable depth settings or two or more depth settings may be needed.

Fig. 9

CA

1) Depth Adjustment Knob: Fig 9.

When Plunge Locking Lever (P) is released,

the Depth Adjustment Knob (A) may be used

to raise and lower the router motor. Turn the

knob clockwise to increase the depth of cut

E

E

and counter-clockwise to reduce the depth

of cut. Once the desired depth of cut is

reached, push up on the Plunge Locking

Lever (P) to lock the setting. Always

be sure that the Plunge Locking Lever (P)

has been released and the Turret Stop Rod

(D) cannot hit a stop on the Turret (I) before

using the Depth Adjustment Knob (A). If

router is mounted in a router table, insert the

Depth Adjustment Wrench (M) into the Above

Table Height Adjustment Access (L) to raise

and lower the router motor. Turn the wrench

counter-clockwise to increase the depth of

cut and clockwise to reduce the depth of

cut.

Note: The Depth Adjustment Wrench (M) can

be inserted into the Depth Adjustment Knob

(A) and used to adjust the depth of cut.

2) Depth Stop Turret and Turret Stop Rod:

Fig 10. The Depth Stop Turret (I) and Turret

Stop Rod (D) allow you to preset up to three

cut depths. For maximum plunge action, the

Depth Adjustment Knob (A) must be turned

counter-clockwise until the motor is at the

top of the rods. For fine adjustment of the

cutting depth, there are three stops attached

to the Depth Stop Turret (I) on the Base of

the FT3000. The Depth Stop Turret turns so

that each of the three stops can be

positioned under the Turret Stop Rod (D).

The Turret Stop Rod (D) has a Course

Adjustment Knob (F) that raises or lowers

the Turret Stop Rod to make large

P

Fig. 10

A

D

F

EE

I

12

Page 13
Image 13
Freud Tools FT3000VCE Adjusting Depth of Cut, Depth Adjustment Knob -Fig, Depth Stop Turret and Turret Stop Rod

FT3000VCE specifications

The Freud Tools FT3000VCE is an exceptional plunge router designed for both amateur woodworkers and seasoned professionals. Known for its reliability and precision, this versatile power tool stands out in the crowded market of woodworking equipment, making it a favorite among DIY enthusiasts and contractors alike.

One of the main features of the FT3000VCE is its powerful 3.0 HP motor. This robust motor provides consistent power, ensuring smooth operation even in tough materials such as hardwoods and laminates. The variable speed control, adjustable from 8,000 to 21,000 RPM, allows users to match the routing speed to the task at hand, whether it’s intricate detail work or heavy stock removal.

Precision is paramount in woodworking, and Freud addresses this with its patented "Soft Start" technology. This feature gradually ramps up the motor speed to reduce sudden jolts, giving users better control and minimizing strain on both the router and the material. Additionally, the electronic feedback system ensures a stable RPM throughout the cut, maintaining performance despite varying load conditions.

The FT3000VCE is built with user comfort in mind. Its ergonomic design includes a balanced body with soft-grip handles, allowing for easier maneuverability and reduced operator fatigue during extended use. The inclusion of a precise depth adjustment system simplifies the process of setting cut depth, while the easy-to-read scale ensures accuracy.

Another noteworthy characteristic is the dual side handles that provide added stability and control, especially during complex routing tasks. The router also features a powerful integrated dust collection system, which helps to maintain a clean working environment by effectively capturing sawdust and debris.

For versatility, the Freud FT3000VCE offers a variety of base options including a fixed base, plunge base, and even a cam-lock system for quick changes between bases. This adaptability allows woodworkers to approach a wide range of projects, from edge profiling to mortising and hollowing.

In summary, the Freud Tools FT3000VCE combines power, precision, and comfort into a single reliable tool that can elevate any woodworking project. With its advanced technologies, ergonomic design, and versatile capabilities, it remains a top choice for those seeking a high-quality plunge router.