Friedrich CP10, CP12 operation manual Cabinet Installation, Fig

Cabinet Installation

1. Open the window. Mark a line on center of the window stool.

Carefully place the cabinet on the window stool and align the center mark on the bottom

front with the center line marked in the Upper Guide window stool.

Window stool

Front Angle

Fig. 1

2.Pull the bottom window sash down behind the Upper Guide until they meets.

NOTE: Do not pull the window sash down so tightly that the movement of Frame Curtain is restricted.

3.Loosely assemble the Sill Support using the parts in Fig. 3.

Window Sash Upper guide

Foam-pe 13

Cabinet

Frame Curtain 1

Foam-pe

Fig. 2

4.Select the position that will place the Sill

Support near the outer most point on sill (See Fig. 4)

NOTE: Be careful when you install the cabinet (Frame Guides are broken easily).

5.Attach the Sill Support to the cabinet track hole in relation to the selected position using

2 -type A screws in each support (See Fig. 4).

INDOOR

Bolt 3

Frame Guide 11

INDOOR

OUTDOOR

Sill Support 2 Nut 4

Fig. 3

Screw(Type A) 5

About 1/2"

Cabinet

OUTDOOR

Fig. 4

11