Friedrich CP24 Air Conditioner Use, Electrical Shock Hazard, Plug into a grounded 3 prong outlet

WARNING

Electrical Shock Hazard

Connect green ground wire to ground screw.

Failure to do so can result in death or electrical shock.

3.Connect green ground wire to cabinet base with ground screw.

Position ground wire pointing straight up. Put excess ground wire between coil and air conditioner cabinet.

A

B B

A

A. Green ground wire

B. Ground screw

4.Push front panel straight on and then lower it slightly to lock it into place.

5.5. UsingUsing2 -1#10- #10x ³⁄₈x"3round/ " round-head-headscrews,screw,attachattachbottomfront offrontpanelof

8

panel to chassis. to chassis.

6.Reinstall fi lter and replace front grille.

NOTE: For through-the-wall installations, if needed, install molding around room side of cabinet.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

8.Press RESET on the power supply cord.

Air Conditioner Use

Operating your air conditioner properly helps you to obtain the best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

■If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.

■Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.

NOTE: In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.

11