JVC MX-J300 When selecting “- CD - - -”, When selecting “TUNER FM” or “TUNER AM”, Press TIMER

6 When selecting “– CD – – –”

1)Press 4or ¢ to select the disc number, then press SET.

2)Press 4or ¢ to set the track number, then press SET.

The unit enters volume setting mode.

When selecting “TUNER FM” or “TUNER AM”

Press 4 or ¢ to select the preset station number, then press SET.

The unit enters volume setting mode.

7 Press 4or ¢to set the volume level.

•You can select the volume level from among four levels. If you select “ VOL – – –,” the volume is set to the last level when the unit has been turned off.

–PRESET +

SET

– PRESET +

On the remote control:

1	Press SHIFT.	SHIFT
2	Press TIMER.	TIMER
		2

DAILY

The DAILY indicator also starts flashing on the display.

•Each time you press the button, the timer setting mode changes as follows:

	DAILY = ON TIME = REC = ON TIME =
	Clock setting (See page 11.) = Canceled
3	Press TIMER again.	TIMER
		2
	“ON TIME” appears for 2 seconds, then the

DAILY

8 Press SET to complete the Daily SET

Timer setting. The DAILY indicator stops flashing and remains

lit. The settings you have done are shown on the display in sequence.

9 Press POWER to turn off the unit	STANDBY
(on standby) if you have set the Daily POWER
Timer with the unit turned on.

To turn on or off Daily Timer after its setting is done

unit enters on-time setting mode.

DAILY

DAILY

4 Set the on-time you want the unit

1Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.

2To turn off the Daily Timer, press

CANCEL.

The DAILY indicator goes off and “OFF” appears on the display.

The Daily Timer is canceled, but the setting for the Daily Timer remains in memory.

To turn on the Daily Timer, press SET.

The DAILY indicator lights up on the display. The settings you have done are shown on the display in sequence for your confirmation.

CLOCK/TIMER

DEMO

CANCEL

SET

to turn on.

1)Press SELECT – or SELECT + to set the hour, then press SET.

2)Press SELECT – or SELECT + to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

5 Set the off-time you want the unit to turn off (on standby).

1)	Press SELECT – or SELECT + to set the
	hour, then press SET.
2)	Press SELECT – or SELECT +to set the
	minute, then press SET.

– SELECT +

4 5

SET

8

–SELECT +

4 5

If the unit is turned on when the timer-on time comes

Daily Timer does not work.

The unit enters source selecting mode.

SET

8

DAILY

– 23 –