Manuals / JVC / Home Audio / Stereo System

JVC MX-J300 Using the Timers, Using Daily Timer, Set the on-timeyou want the unit, to turn on

Models: MX-J300

1 34

Download 34 pages 54.39 Kb

Page 25

Using the Timers

Using the Timers

Continued

There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See page 11.)

3	– PRESET +
	Set the on-time you want the unit

	to turn on.

1) Press 4 or ¢to set the hour, then press SET.

2)Press 4or ¢to set the minute, then press SET.

Using Daily Timer

“OFF TIME” appears for 2 seconds, then the unit enters off-time setting mode.

SET

With Daily Timer, you can wake to your favorite music or radio program.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the

on-time comes (the indicator flashes just before the on- time, and continues flashing while the timer is operating). Then, when the off-time comes (“OFF” flashes just before the off-time), the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

On the unit:
1	Press CLOCK/TIMER until	CLOCK/TIMER

4 Set the off-time you want the unit to turn off (on standby).

1)Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

The unit enters source selecting mode.

DAILY

5 Press 4or ¢to select the source to play, then press SET.

•Each time you press 4 or ¢, the source changes as follows:

TUNER FM TUNER AM

AUX TAPE – CD – – –

–PRESET +

SET

–PRESET +

SET

“DAILY” appears on the display.

DAILY

The DAILY indicator also starts flashing on the display.

•Each time you press the button, the timer setting mode changes as follows:

DAILY ON TIME REC

Canceled		Clock		ON TIME
Canceled		Clock		ON TIME
		setting

(See page 11.)

2 Press CLOCK/TIMER again.	CLOCK/TIMER
“ON TIME” appears for 2 seconds, then the

unit enters on-time setting mode.

DAILY

DAILY

TUNER FM: tunes into a specified preset FM station. =go to step 6.

TUNER AM: tunes into a specified preset AM station. = go to step 6.

–CD – – –: plays a disc from a specified track of a specified disc. = go to step 6.

•Make sure there is a CD on the selected disc number tray.

TAPE: plays a tape in deck A or B. =go to step 7.

•Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•Make sure that the tape direction is correct. AUX: plays an external source.= go to step 7.

•To use this setting, the external component has to be equipped with the timer function.

– 22 –

Image 25

JVC MX-J300 Using the Timers, Using Daily Timer, Set the on-timeyou want the unit, to turn on, Press CLOCK/TIMER until

Contents

Consists of CA-MXJ300and SP-MXJ300 INSTRUCTIONSConsists of CA-MXJ200and SP-MXJ200 CA-MXJ300 SP-MXJ300– G-1– Warnings, Cautions and OthersCaution --POWER switch Attention --Commutateur POWERFor Canada/pour le Canada G-2For Canada/pour le Canada Power sources PrecautionsInstallation IntroductionContents CA-MXJ300 Location of the Buttons and ControlsCA-MXJ300Front Panel CA-MXJ200 CA-MXJ200Front Panel Remote Control Putting the Batteries into the Remote Control Connecting AntennasGetting Started Unpacking2Insert the end of the speaker cord into the Connecting Speakersterminal 3Release the finger from the clampPress and hold DEMO for more than seconds.DEMO Connecting Other EquipmentTo connect audio equipment To start the display demonstration manually2 Press SELECT - or + to adjust the Setting the ClockOn the unit 1Press CLOCK/TIMER 2Press 4or ¢to adjust the hour, then press SETAdjusting the Volume Turning On the Power and Selecting the SourcesSelecting the Sound Modes Reinforcing the Bass SoundTuning in a Preset Station Tuning in a StationPresetting Stations Press and hold TUNING - /+ forLoading CDs Playing Back CDsPlaying Back the Entire Discs - Continuous Play Basic CD Operations2 Select the Program play mode On the unit Program PlayProgramming the Playing Order of the Tracks 3 Press one of the disc numberPlaying at Random - Random Play To check the program contents1 Prepare CDs 2 Select the Random play modeProhibiting Disc Ejection - Tray Lock Repeating Tracks or CDs - Repeat PlayPlaying Back Tapes On the remote control Press TAPE 3 for forwardPlaying Back a Tape 1 Press EJECT 0 for the deck you want to useRecording Tapes on Deck B Recording1 Press EJECT 0for the deck B 4 Check the tape direction of deck BCD Direct Recording Dubbing Tapes1 Press TAPE 23, then 3 Press DUBBINGUsing Daily Timer Using the TimersPress CLOCK/TIMER until 2 Press CLOCK/TIMER againWhen selecting “TUNER FM” or “TUNER AM” 6 When selecting “- CD - - -”7 Press 4or ¢to set the volume level Press TIMER7 When selecting “- CD - - -” Using Recording Timerset the volume level Timer setting4 Press TIMER again Press TIMER until “REC” appearsPut a recordable cassette into deck B on the displayUsing Sleep Timer Timer Priority7 Select the preset station 8 Press POWER to turn off the unitHandling discs MaintenanceCassette decks Specifications TroubleshootingSupplied accessories Amplifier sectionQUALITYSERVICE JVC SERVICE & ENGINEERING COMPANY OF AMERICAFACTORY SERVICE CENTER LOCATIONS Don’t service it yourselfLIMITED WARRANTY AUDIO-1 VICTOR COMPANY OF JAPAN, LIMITED 0200KSMMDWHIT