JVC HR-J712EU, HR-J713EU Timer Programming, 22ENTIMERRECORDING, Access Showview Screen

22ENTIMERRECORDING

SHOWVIEW

Timer Programming

Before performing SHOWVIEW Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

	1	2	3
			2
NUMBER	4	5	6
	7	8	9
		0	4

PROG 1 ?

OK

With SHOWVIEW, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.

ACCESS SHOWVIEW SCREEN

1	Press PROG.	SHOWVIEW
		[0 – 9] =
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER SHOWVIEW NUMBER

Press the NUMBER keys to	SHOWVIEW
enter the SHOWVIEW
	1 2 3 4 5 6 7 8
2 number of a programme
you wish to record.

●If you make a mistake, press and input the

correct number.	[0 – 9] =
	[ ] : DELETE
	[PROG] : EXIT

The SHOWVIEW number you enter appears on the front display panel:

The display panel can show only a 4-digit number.

ACCESS SHOWVIEW PROGRAM SCREEN

Press OK, and the					– P1 –
	SHOWVIEW Program screen			SHOWVIEW	123456789
3 appears (if you’re just				START		STOP
			21:00		= 22:00
	starting out, “P1” appears).			SP	VPS/PDC OFF
	The display panel shows the
				DATE		TV PROG
	programme start time.
			25.12		1
	Pressing	changes the				ARD
	display to the programme
				: OK
	stop time, then the date and
	channel position.
		SP

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see "SHOWVIEW Setup" on page 46 and set the Guide Program number for that SHOWVIEW number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid SHOWVIEW number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 23.