JVC HR-J713EU Basic Recording, Choose A Programme, Set Tape Speed, Start Recording, Pause/Resume

RECORDING

EN17

Basic

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

PLAY

DISPLAY

STANDBY/ON

TIMER

REC LINK TV PROG

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1		LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.
		● The counter is reset to 0:00:00 and the recorder
		power comes on automatically.
		CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
2 channel you wish to record.
		SET TAPE SPEED
	Press SP/LP ( ). Check the SP/LP indicator on the
		recorder display panel to confirm the selected tape
3 speed.

NUMBER

RECORD

PAUSE

1 2 3

2

4 5 6

7 8 9

0 4

TV PROG

4		START RECORDING
	Press and hold RECORD and press PLAY on the remote
		control, or press RECORD on the recorder.
		B.E.S.T. takes place at the beginning of both the
		first SP and the first LP recording after inserting the
		cassette (☞ pg. 20).
		If "DIRECT REC" is set to "ON", the programme
		that appears on the TV screen will be recorded
		(☞ pg. 11).
		PAUSE/RESUME
		RECORDING
5 Press PAUSE. Press PLAY to resume recording.

SP/LP

1?

PLAY

PAUSE

RECORD

STOP RECORDING

Press STOP on the remote control or STOP/EJECT on

the recorder. Then press STOP/EJECT to remove the

6 cassette.

STOP

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab