JVC HR-J712EU Edit To Or From Another Video Recorder, 30EN, Set Recording Deck’S, Input Mode

30EN

EDITING(cont.)

Edit To Or

From Another

Video

Recorder

You can use your video recorder as the source player or the recording deck.

	MAKE CONNECTIONS
	Connect the player’s 21-pin SCART (AV) connector to
	the recorder’s 21-pin SCART (AV) connector as
1 illustrated on page 31.
	When Using Your Video Recorder As The Source
	Player . . .
	. . . connect its AV1 IN/OUT connector to the recording
	deck.
	When Using Your Video Recorder As The Recording
	Deck . . .
.	. . . connect its AV2 IN/DECODER or AV1 IN/OUT
	connector to the source player.

1 2 3

4 5 6

7 8 9

NUMBER "0" 0

2

4

TV PROG

SET RECORDING DECK’S

INPUT MODE

Set to AUX. With this video recorder, press NUMBER

key "0" and/or TV PROG to select depending on the

2 connector being used — “L-1” for the AV1 IN/OUT

connector, or “L-2” for the AV2 IN/DECODER connector.

● When using the AV2 IN/DECODER connector, make

sure "AV2 SELECT" is set to "AV2" (☞ pg. 31).

SET EDIT MODE

3 See "Picture Control" on page 16.

1 ?

OK

MENU

4		START SOURCE PLAYER
	Engage its Play mode.
5		START RECORDING DECK
	Engage its Record mode.

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select EDIT to dub tapes in step 3, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.

●When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (☞ pg. 9).