JVC MX-J300 manual Playing Back Tapes, Playing Back a Tape

Playing Back Tapes

This unit provides two types of cassette deck: Deck A for one-way playing only and deck B for Reverse Mode playing as well as one-way playing.

You can play back only type I tapes.

Playing Back a Tape

To fast wind to the left or to the right, press 4or ¢ (or

1or Á on the remote control).

The tape direction indicator (23) starts flashing quickly on the display.

To remove the cassette, press 0EJECT for deck A or

EJECT 0for deck B.

1 Press EJECT (0) for the deck you want to use.

0EJECT

For deck B

For deck A 0EJECT

2 Put a cassette in, with the exposed part of the tape down.

To play both sides repeatedly — Reverse Mode

Reverse Mode works for deck B.

When it is in use, the tape automatically reverses at the end of a side and the unit starts playing the other side of the tape, and repeats the same process.

To use Reverse Mode, press REVERSE MODE		REVERSE MODE
so that the Reverse Mode indicator on the display
lights up as —	.

•Each time you press the button, the display changes to show the following:

0EJECT

3 Close the cassette holder gently.

If you put cassettes in both decks A and B, the last deck you have put a cassette into is selected.

To operate the other deck, press TAPE A/B (or TAPE A or TAPE B on the remote control).

4 On the unit:

Press TAPE 23. TAPE

On the remote control:

Press TAPE 3 for forward

direction playback, or press TAPE 2for reverse direction playback.

When the deck A is selected:

The tape plays only the front side and the tape direction indicator (3) starts flashing slowly.

When the tape plays to the end, the deck automatically stops.

When the deck B is selected:

The tape play starts and the tape direction indicator (23) starts flashing slowly to indicate the tape running direction.

•Each time you press the button, the tape direction changes:

3: plays the front side.

2: plays the reverse side.

When the tape plays to the end, the deck automatically stops if the Reverse Mode is not on. (See “To play both sides repeatedly — Reverse Mode.”)

To stop during play, press 7.

To operate the other deck, press TAPE A/B (or TAPE A or TAPE B on the remote control), then TAPE 23.

: The Cassette Deck automatically stops after playing both sides of the tape. (Stops when playback in the 2 direction is finished.)

: The Cassette Deck continues to play both sides of the tape until the 7button is pressed.

: The Cassette Deck automatically stops

after playing one side of the tape.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator on the display lights up as — .

The use of the C-120 or thinner tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch- rollers and the capstans.

– 19 –