Continued

To locate a particular point in a track

During play, press and hold 4or ¢.

4: Fast reverses the disc.

¢: Fast forwards the disc.

To go to another track

PRESET +

PRESET +

2 Select the Program play mode.

On the unit:

Press PROGRAM.

On the remote control:

Press PLAY MODE repeatedly until the PRGM indicator lights on the display. Each time you press the button, the CD play mode changes as follows:

PROGRAM

PLAY MODE

Press 4 or ¢ repeatedly before or during playback.

4: Goes back to the beginning of the current or previous tracks.

¢: Skips to the beginning of the next or succeeding tracks.

Program play = Ramdom play =Continuous play

=(back to the beginning)

1 2 3

PRGM

If you press and hold 4 / ¢before playing

You can change the tracks continuously.

To go to another track directly using the number buttons

Pressing the number button(s) before or during play allows you to start playing the track number you want.

When a track number button is pressed, CD play starts from the track of the currently selected disc.

Ex.: For track number 5, press 5.

For track number 15, press +10 then 5. For track number 20, press +10, then 10.

For track number 32, press +10 , +10, +10, then 2.

1 2 3

4 5 6

7 8 9

10 +10

Programming the Playing Order of the Tracks

— Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

To use Repeat play for Program play, press REPEAT after starting Program play.

If a program has been stored in memory, the program is called up.

3 Press one of the disc number

CD 3

buttons (CD 1, CD 2, and CD 3)

 

to select the disc number you

CD 2

 

want to play.

 

CD 1

Track number

 

Disc number

Program step number

 

1 2 3

PRGM

4 Select a track from the CD selected in the above step.

On the unit:

Press 4or ¢to select the track number, then press SET.

PRESET +

SET

On the remote control:

 

1

2

3

Press the number buttons.

 

 

 

• For how to use the number

 

4

5

6

buttons, see “To go to another

 

 

 

track directly using the number

7

8

9

buttons” described to the left.

 

 

 

 

 

 

10

+10

 

1

2

3

 

 

 

PRGM

 

 

 

 

 

1 Load discs.

If the current playing source is not the CD player, press CD 6, then 7on the unit (or CD 7/CLEAR on the remote control) before going to the next step.

5 Program other tracks you want.

To program tracks from the same disc, repeat step 4.

To program tracks from a different disc, repeat steps 3 and 4.

6 Press CD 6.

The tracks are played in the order you have programed.

– 16 –

Page 19
Image 19
JVC MX-J300 manual Program Play