Friedrich PACKAGED TERMINAL AIR CONDITIONERS AND HEAT PUMPS Friedrich PTAC Accessories, Pxws

Friedrich PTAC Accessories

New Construction Accessories

MODEL NUMBER	DESCRIPTION		PHOTO
	WALL SLEEVE G-90 zinc coated steel is prepared
	in an eleven-step process, then powder coated for
	maximum coverage and protection. The wall
PXWS	sleeve is insulated for thermal efficiency. 16" High
	x 42" Wide x 13¾" Deep.
			PXWS
PXGA	GRILLE Standard, stamped aluminum, anodized
	to resist chalking and oxidation.
PXAA	ARCHITECTURAL GRILLES Consist of heavy-
	gauge 6063-T5 aluminum alloy:
PXDB	– Clear, extruded aluminum
PXSC	– Dark bronze acrylic enamel		PXDB
	– Also available in custom colors.
	CONDENSATE DRAIN KIT Attaches to the bottom
	of the wall sleeve for internal draining of condensate
PXDR10	or to the rear wall sleeve flange for external draining.
	Recommended on all units to remove excess
	condensate. Packaged in quantities of ten.
			PXDR10
	DEEP WALL SLEEVE EXTENSION	A four inch
	deep anodized aluminum extension that attaches
PXWE	to the outside of the wall sleeve when the wall is
	greater than thirteen inches thick (11¾" when a
	subbase is used, 12¼" when a lateral duct is used).
			PXWE
	DECORATIVE SUBBASE Provides unit support
	for walls less than six inches thick. Includes leveling
PXSB	legs, side filler panels and mounting brackets for
	electrical accessories. Accepts circuit breaker,
	power disconnect switch, or conduit kit.		PXSB
	CONDUIT KIT WITH JUNCTION BOX Hard wire
	conduit kit with junction box for 208/230V and 256V
PXCJ	units (subbase not required). Kit includes a means
	of quick disconnect for easy removal of the chassis.
	*Required for 265V installations.
			PXCJ

8