Friedrich PTAC - R410A service manual General Product Features

General Product Features

DIAMONBLUE	Diamonblue seacoast protection protects the outdoor coil from harsh environments. Comes standard
TECHNOLOGY	on all models.
DIGITAL DEFROST	The new Friedrich PTAC uses a digital thermostat to accurately monitor the outdoor coil conditions to al-
	low the heat pump to run whenever conditions are correct. Running the PTAC in heat pump mode saves
THERMOSTAT
	energy and reduces operating costs. The digital thermostat allows maximization of heat pump run time.
INSTANT HEAT	Heat pump models will automatically run the electric heater to quickly bring the room up to temperature
	when initially energized, then return to heat pump mode. This ensures that the room is brought up to
HEAT PUMP MODE
	temperature quickly without the usual delay associated with heat pump units.
EVEN HEAT MONITORING	of the setpoint. If necessary, the unit will cycle the electric heat to maintain the temperature. This feature
	-
	The owner may choose between fan cycling or fan continuous mode based on property preference. (Note:
	Even heat monitoring and quiet start/stop fan delay only operate in fan cycle mode) Fan continuous mode is
SEPARATE HEAT/COOL
FAN CYCLE	energy by only operating the fan while the compressor or electric heater is operating. The ability to set the
CONTROL	fan cycling condition independently between heating and cooling mode will increase user comfort by
	allowing the choice of only constantly circulating air in the summer or winter time. Unlike other PTAC
	brands that only allow one selection.
EMERGENCY	In the event of a compressor failure in heat pump mode, the compressor may be locked out to provide
	heat through the resistance heater. This feature ensures that even in the unlikely event of a compressor
HEAT OVERRIDE
	failure, the room temperature can be maintained until the compressor can be serviced.
DESK CONTROL	All Friedrich digital PTACs have low voltage terminals ready to connect a desk control energy manage-
	ment system. Controlling the unit from a remote location like the front desk can reduce energy usage and
READY
	requires no additional accessories on the PTAC unit.
INDOOR COIL	temperatures cause the indoor coil to freeze. When the indoor coil reaches 30°F, the compressor is
FROST SENSOR	disabled and the fan continues to operate based on demand. Once the coil temperature returns to 45°F,
	the compressor returns to operation.
ULTRA QUIET	The new Friedrich PD series units feature an indoor fan system design that reduces sound levels without
AIR SYSTEM
HIGH EFFICIENCY	The Friedrich PTAC has been engineered so that all functional systems are optimized so that they work
	together to deliver the highest possible performance.
DUAL MOTOR	With Friedrich’s new dual-motor design the indoor motor can run at slower speeds which reduces sound
	levels indoors.
ROTARY COMPRESSOR	-
	ciency.
STAINLESS STEEL	Outdoor coil endplates made from stainless steel reduce corrosion on the outdoor coil common with other
ENDPLATES	coil designs.
TOP -MOUNTED
ANTIMICROBIAL
AIR FILTERS	front cover.
FILTERED FRESH	Friedrich PTAC units are capable of introducing up to 75 CFM of outside air into the conditioned space.
AIR INTAKE	The outdoor air passes through a washable mesh screen to prevent debris from entering the airstream.
R-410A REFRIGERANT	Friedrich PTAC units use environmentally-friendly refrigerant.

5