How to operate your Friedrich room air conditioner
Figure 3
12
DISPLAY
|
| 2 |
1 |
|
|
|
| 4 |
3 |
| 5 |
|
| |
6 |
| 8 |
|
| |
|
| 7 |
9 | 11 | 10 |
|
| 15 |
13 |
| 14 |
To start unit
1If your air conditioner is installed and plugged into a proper receptacle, it is ready to go. Touch ON/OFF button once. The unit will automatically be in COOL mode with the temperature set at 75°F (24°C) and the fan speed at F1, the sleep setting. There is a
2Should the FILTER ALERT light turn on when you first turn on the unit, touch FILTER ALERT to turn off the light.
FILTER ALERT light will come on after 250 hours of use. (See page 7 for filter cleaning instructions.) Touch FILTER ALERT to reset.
To set mode of operation
3When you first turn on the unit, it will be in the COOL mode (light on), with constant fan.
4Touch MoneySaver® (light on) to activate the MoneySaver® feature.
MoneySaver® is a feature that cycles the fan with the compressor so that the fan does not run all the time. This saves energy and improves dehumidification. MoneySaver® will also run to test the temperature if the off cycle is too long. Or you may prefer constant fan for more air movement. To return to constant fan, touch COOL.
5Touch FAN ONLY (light on) if you want only the fan to run. You may want to use this feature in conjunction with the FRESH AIR / EXHAUST lever to bring outside air into a room, or to exhaust stale air. (See page 7, "Fresh Air and Exhaust Control" for more information.)
4
