Friedrich SS09 manual Congratulations, Table of Contents

920-090-05 (10-04)

Congratulations!

You have purchased the very latest in room air conditioner technology. Your new Friedrich high efficiency room air conditioner will give you many years of dependable service. Many extra features have been built into your Friedrich air conditioner to assure quiet operation, the best circulation of cool, dry air, functional controls, and the most economical operation.

Table of Contents
Before Operating Your Unit	2
To Start Unit	4
To Set Mode of Operation	4
MoneySaver® Feature	4
To Adjust Temperature	5
To Adjust Fan Speed	5
To Activate Smart Fan	5
To Set Hour Clock	5
To Set The Timer	5
Automatic Component Protection	5
How to Use the Remote Control	6
Removing/Cleaning the Filter	7
Fresh Air & Exhaust Control	7
Troubleshooting Tips	8
Warranty	9

WARNING: Before operating your unit

Make sure the wiring is adequate for your unit.

If you have fuses, they should be of the time delay type. Before you install or relocate this unit, be sure that the amperage rating of the circuit breaker or time delay fuse does not exceed the amp rating listed in Figure 1.

DO NOT use an extension cord.

The cord provided will carry the proper amount of electri- cal power to the unit; an extension cord will not.

Make sure that the receptacle is compatible with the air conditioner cord plug provided.

This insures proper grounding. If you have a two-prong receptacle you will need to have the circuit replaced by a certified electrician with a grounded circuit that meets all national and local codes and ordinances. Under no circumstances should you remove the ground prong from the plug. You must use the three-prong plug furnished with the air conditioner.

2