Friedrich How to operate your Friedrich ZStar, Function Controls, English, Temperature Control

How to operate your Friedrich ZStar®

Function Controls

	Off		FUNCTION CONTROL
	Hi	Hi	This dial allows you to select 2 cooling and 2 fan speeds.
	Fan O	Cool
			Turn to Off to turn everything off.
Lo	O	Lo	Turn to Hi Cool for quick cooling.
Fan		Cool	Turn to Lo Cool to maintain a desired temperature.
			The Hi Fan setting provides maximum circulation of filtered room air
			without cooling.
	Mode		The Lo Fan setting is a slow fan speed without cooling.
			TEMPERATURE CONTROL
			This dial is the thermostat. Turn it clockwise for cooler and
			counterclockwise for warmer temperature.

WarmerCooler

Temperature

• FOR NORMAL COOLING

1.Turn the Mode switch to the Hi Cool or the Lo Cool setting.

2.Set the Temperature control to the desired temperature point (the mid-point is a good

starting position). If the room temperature is not satisfactory after a reasonable time, adjust the control to a cooler or warmer setting, as appropriate.

• FOR MAXIMUM COOLING

1.Turn the Mode switch to the Hi Cool setting.

2.Set the temperature control to the coolest temperature point (all the way to the right).

• FOR QUIETER OPERATION

1.Turn the Mode switch to the Lo Cool setting.

2.Set the Temperature control as needed.

CAUTION

When the air conditioner has finished cooling the room and is turned off or set to the fan position, wait at least 3 minutes before resetting to the cooling operation again.

ENGLISH

5