Air Conditioner Features |
|
|
(continued) | YOU WILL SEE : | LIGHT ON |
| ||
|
| |
CHECK FILTER FEATURE: |
|
|
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation and cooling. The LED (light) will illuminate after 250 hours of operation. To reset after cleaning the filter, press the “Check Filter” button and the light will go off.
LIGHT ON
SLEEP FEATURE: | YOU WILL SEE: |
DO THIS:
PRESS SLEEP
BUTTON
Note: In this “MODE” the set temperature will increase by 2 degrees F 30 minutes after the mode is selected. The temperature will then increase by another 2 degrees F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the or- iginally selected temperature. This ends the “Sleep” MODE and the unit will continue to operate as originally programmed. The “Sleep” MODE program can be cancelled at any time during operation by again pressing the “Sleep” button.
TO TURN UNIT OFF: | YOU WILL SEE: |
DO THIS:
PRESS ON/OFF
BUTTON
FAULT CODES:
If the display reads"AS", a sensor has failed.Contact your Authorized Frigidaire Service Center.
If the display reads"ES", a sensor has failed.Contact your Authorized Frigidaire Service Center.
8
