Air Conditioner Features
(continued)
STEP 5 — TO OPERATE
ON FAN ONLY:
☞ | ☞ | ☞ | ☞ |
|
DO THIS:
PRESS ON
(if not running)
PRESS
FAN ONLY
CHOOSE ONE
YOU WILL SEE:
72
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
STEP 6 — TO USE THE
ENERGY SAVER FEATURE:
☞
DO THIS:
PRESS
ENERGY SAVER
YOU WILL SEE:
72
Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until cooling is needed, as sensed by the room temperature control. During this time, it may come on for 3 minutes to sense whether cooling is needed, then it will go off for 10 minutes. It will continue doing this to sample the room air for as long as necessary.
STEP 7 — TIMER-DELAY
STOP FEATURE
72 | ☞ |
|
☞
Note: The unit must be running to make this setting.
DO THIS:
PRESS
(if unit is not
running)
PRESS
YOU WILL SEE:
0.5
Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.
8
