Kenmore 790.75503 manual Clock, Setting, Minute Timer

Setting the

Clock

FEATURE OVERVIEW

Clock

• Minute Timer

Clock

When tile range is first plugged in, or when tile power supply to tile appliance has been interrupted, tile display will flash.

INSTRUCTIONS DISPLAY

To Set the Clock: (example 1:30)

I.Push CLOCK. The word "TIME" will appear in the display. The

timer allows you 5 seconds to go to step 2. :',p_

2.Push and hold the UP or DOWN ARROW to set the time of clay to 1:30. The word "TIME" will disappear after 6 seconds and the clock will start. You may also push CLEAR OFF; the word "TIME" will disappear and the clock will start.

Minute Timer

Note: The minute timer does not start or stop cooking and is not active during self-clean. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used independently during any of the bake or broil functions. The timer can be set for any amount of time from 5 seconds to 9 hours and 55 minutes.

INSTRUCTION	DISPLAY
To Set the Minute Timer

1.Push TIMER ON/OFF, ":00" andtheword "TIMER" will be displayed.

2.Push and hold the UP ARROW until the desired time appears in the display. As soon as the UP ARROW is released, the time will begin to count clown in the display.

3.When the set time has run out, the timer will beep 3 times and will continue to beep once every 10 seconds for 5 minutes or until TIMER ON/OFF is pushed.

When settingtheminutetimer	for: The time			will appear in the
		display	and	increase in:
5 seconds to I minute 59 seconds		5 second increments
2 minutes to 9 minutes. 59 seconds		10 second increments
10 minutes to 59 minutes 59 seconds		I minute	increments
I hourto 9 hours 55 minutes		5 minute	increments

To Change the Minute Timer:

Push and hold tile UP or DOWN ARROW to increase or decrease tile time.

To Cancel the Minute Timer before the set time has run out:

Push and hold tile DOWN ARROW until ":00" appears in the display or push TIMER ON/OFF.

11